This option allows us to regulate the force exercised by the machine, it to fit to the concrete needs of every work, avoiding possible deteriorations in delicate pieces for an excess of force.
Hydraulic system (two speeds)
The double speed is very useful for the saving of time in crossed lengths. The machine advances and moves back to a rapid speed, realizing the change to speed of work automatically on having started exercising force on the piece pressing.
(mm x min)
(mm x min)
Manoeuvre by means electric pedals
Manoeuvre by means electrical pedals
For major comfort in the use of the machine, the operation is realized by electrical pedals in the soil, being able to place them in any position about the machine. The maximum speed of the cylinder with this option is, according to regulation of safety, of 10mm x second. There exist models that incorporate this option of series.
Manoeuvre by means of two-hand safety activation.
Manoeuvre two hands.
Obligatory, according to safety regulation, in machines that overcome the speed of 10mm x second.
The operation realizes for a support with two push-buttons that they must be pulsated simultaneously.
It incorporates the correspondent rereads of safety for category 4.
Stroke regulation by means of limit switcles and anti-spin
For works where it is necessary to have a control in the tour of the cylinder. It stops the advance and the setback according to the adjustment for one squares milimetrica.
This option must go necessarily accompanied of the maneuver for pedals / double push-button.
Interesting option that avoids all the effort in the operations of raise and descent of the bench.
We replace the traditional system of crank with an engine - reducer and electrical investing box to realize comfortably the operation for electrical push-buttons.
Special front opening 1500 mm
Option that increases to 1500 mm the frontal light between(among) the columns of the machine, for a major capacity of the same one in pieces of great size.
Here exist models who incorporate this option of series.
Folding equipment 415 mm
We have 2 accessories of folded in 415 and 835 mm, length suitable for the folded one in platens and sheets etc.
It is obligatory to install the regulator of pressure and advisably to install the end stops for the folded ones.
To see equipments of folded
Safety front door
For work with fragile materials, like springs and bearings is imperative installing the accessory denominated "safety door".
Rear protection fixed
For work with fragile materials, like springs and bearings is imperative installing the
accessory denominated "safety back door".
Industrial estate SAU-3
C/ Bassots, No. 10
25243 EL PALAU D’ANGLESOLA (Lleida - Spain)
P. O. Box 149
25230 MOLLERUSSA (Lleida - Spain)
Phone (+34) 973 71 12 81
Fax (+34) 973 71 22 25